Digital classifier has been developed for creating schemes of territorial planning of the Russian Federation according to requirements of the order of the Ministry of Economic Development No. 123 dated 02/28/2023
Specialists of KB "Panorama" have prepared a new version of the digital classifier for creating schemes of territorial planning terrplan.v6.rscz. The digital classifier complies with the requirements of the Order of the Ministry of Economic Development of the Russian Federation dated February, 28th, 2023 No. 123, which comes into force after 60 days from the date of its official publication (dated April 20, 2023).
On the basis of order requirements, changes were made to 92 layers: "Forests", "Hydraulic structures", "Power lines (LEP)", "Territories at risk of emergency situations", "Other zones with special conditions of use", "Objects of the unified state systems for the prevention and liquidation of emergency situations", "Objects of water transport", "Objects of education and science", "Objects of recreation and tourism" and others. In the classifier, the list of objects has been expanded, the conventional symbols and the applied color palette have been updated, changes have been made to the list of mandatory characteristics, and the lists of values of classified attributes have been supplemented. The digital classifier terrplan.v6.rscz is included in the GIS "Panorama" for mapping objects of federal, regional and local importance, necessary for the preparation of territorial planning documents of the Russian Federation, subjects of the Russian Federation and municipalities.
The updated classifier is available for download in the "Classifiers" section.
Digital classifier has been developed for creating schemes of territorial planning of the Russian Federation according to requirements of the order of the Ministry of Economic Development No. 123 dated 02/28/20231GIS "Panorama"
At conference "Digital Industry of Industrial of Russia" in Nizhni Novgorod the possibilities of GIS "Panorama Mobile" for domestic Aurora OS are demonstrated
The flagship tablet "Kvadra_T" based on a modern multi-core ARM processor is presented by the Russian manufacturer "Yadro". The software on a tablet device with Aurora OS includes the GIS "Panorama Mobile". The participants of the conference can now get acquainted with the wide possibilities of mobile GIS from KB "Panorama".
GIS "Panorama Mobile" allows you to open and edit the main formats of digital maps of GIS "Panorama" and popular geoportals on mobile devices based on the Aurora OS, to process information from the built-in GPS/GLONASS receiver. The user can prepare in advance a necessary set of spatial data in one of desktop products (GIS "Panorama", Panorama-editor, GIS Panorama Mini) and to transfer it into the mobile GIS "Panorama Mobile". The process of working with data is carried out autonomously, without connecting to the Internet. When the user moves, his current position is dynamically displayed according to the coordinates obtained from the GPS/GLONASS receiver. For ease of use, it is possible to synchronize the position of the map with the current location. To save the coordinates obtained during movement, a track recording mode is provided, which creates a separate map and puts the trajectory of movement onto it. For all objects of a map during the work the basic information is provided . The program is developed on the basis of the GIS Constructor toolkit, which provides components for creating mobile applications for working with digital maps in the C++ programming language using the Qt.
Aurora OS - is a Russian mobile operating system developed by the "Open mobile platform" company. OS been created to build a trusted mobile infrastructure, protect sensitive information in government organizations, large and medium-sized commercial companies. Contributes to ensuring the technological sovereignty of the state through a secure mobile environment and meets all the requirements of regulators in the field of national security and information protection. Aurora OS allows centrally to operate the base of mobile devices and the used mobile software at use of Aurora Center. The current version of the mobile Aurora OS has been certified by the FSTEC of Russia and fully complies with the requirements for type "A" operating systems of 4 protection class and 4 trust levels.
The conference "Digital Industry of Industrial Russia" is one of the five largest events in the field of the digital economy in Russia. For many years, it has been a key platform for discussing the digital transformation of society and key sectors of the economy. It is a meeting point for market leaders and a showcase of best practices, technologies, and ideas.
In KB "Panorama" the GIS "Panorama"version 14.5.7 has been developed. In the program a support of the state address register (SAR) of a new format has been added, tools of editing vector maps and creating digital classifiers of spatial data have been updated. Support for a new version of the database of parameters of coordinate systems according to the EPSG classification has been implemented, support for geoportals has been improved, the tasks of transforming vector maps and optimizing rasters (images) have been improved. The geodesy editor and the complex for maintaining cadastral documents have been updated, the formation of a document on the location of the boundaries of settlements and territorial zones has been implemented in accordance with the requirements of the Order P/0292 dated 07/26/2022, which entered into force on 03/01/2023.
In connection with the transition of the Federal Information Address System (FIAS) to a new format for storing information about addresses - the State Address Register (SAR), the address database of the GIS "Panorama" hosted on www.gisserver.info has been updated. The new database contains more than 100,000,000 address points, including land plots, parking lots and apartments. Changes have been made to the address selection dialog, which is used when editing the semantics of objects of cadastral works in the geodesy editor and forming reports on the technical plan of the building. SAR support provides the user with the ability to select an address in municipal and administrative-territorial divisions.
The task "Map Editor" has been improved. In the mode of editing object points, the functionality of the auxiliary "Q" mode has been extended. When editing points of an areal object, pressing the "Q" key disables the sign of a rectangle or, if this sign is absent, leads the object to a rectangular shape (straightens corners). In the mode of points editing, the function of quick recording of the edited object by pressing the "hot" key "S" has been added. In the dialog for selecting the created object for the "Create object" mode, support for the class hierarchy has been added, presented as a tree of layers/classes. The selection of objects is carried out taking into account localizations, layers and classes. The list of selected objects is presented in the form of a table that contains information about the localization, code, key, name and class of objects. The search by all objects of the classifier has been improved with the ability to filter the table by individual localizations. In the search mode by selected objects, all used localizations are set and, when moving in the table of objects, the class is indicated in the tree of layers/classes.
The task "Classifier editor" has been improved. On the "Objects" tab, the functionality for working with the object filter has been expanded. Ability has been added to select objects with taking into account the classes presented in the form of a tree. Also there is added an additional filtering by name, code, key, belonging to the series and the presence of 3D parameters. All filtering options are combined. The view of the table of objects has been improved. Ability has been added to display data about an object in the form of a table with information about localization, code, key, name and class. The view of the table can be changed using the "Object table" mode. Semantics editing mode has been improved. When you change the semantics code, the description of the semantics is automatically changed in the list of possible semantics, in the layer semantics table, in the associated object titles, in the template matching list, in the formula matching list, and in the formulas themselves. The interface of the "Objects" tab has been updated.
The program for reading the database of parameters of coordinate systems - EPSG Reader has been improved. The program allows you to view the EPSG database, export coordinate systems and units of measurement compatible with GIS "Panorama". The result of the program operation is a set of files containing the parameters of coordinate systems projections (epsg.csg, epsg.csp, epsg.csu) for recalculating coordinate systems using EPSG codes and filling in the parameters of coordinate systems of vector maps, images and matrices. In the new version of the program, support for the EPSG database version 10 has been added, and interface of dialog has been improved.
The task of connecting geoportals has been improved. There are added the geoportals from the server of KB "Panorama: Razgrafka 1: 1 000 000, Razgrafka 1: 500 000, Razgrafka 1: 200 000, Razgrafka 1: 100 000. The geoportal of the Bogorodsky District map has been updated. RGIS geoportal of the Ryazan region has been added with the following layers: Public services and institutions, Road facilities, State property, Cultural heritage sites, Branches of the State Bank of Russia, Nature management, Hydrography, Service areas of the PHS, Quarter network, Forest park green belt, SPNT of regional significance, Industrial enterprises, Offers for the sale of plots in 2022, Agricultural land, Telecommunication facilities. There is improved the algorithm for scaling images from geoportals with exceeding the virtual sizes of the image in width and height of 2 Gigapixels or more, which is necessary when detailing the image at a scale larger than 1: 100.
The program of transforming a vector map has been improved. The program is designed to transform a vector map into a selected coordinate system by a set of points. Coordinates of points are measured or loaded from catalogues of coordinates. In the task four linear and three non-linear types of transformation have been implemented.
The use of RAM has been optimized to improve the stability of the program. The output of diagnostic messages about execution of transformation process has been added. The recording of diagnostic messages is enabled through the main menu: Options - Diagnostic log - Record.
The "Optimization of raster" task has been improved, designed to reduce the size of the raster file, arranging the service structures of the raster header and image blocks. "Enhance raster quality" mode has been added designed for processing 24-bit rasters. for processing 24-bit rasters. This mode increases the clarity of images of rasters obtained by scanning cartographic materials. To do this, the color values of the original image are smoothed by method of bicubic interpolation over 16 neighboring pixels of the original raster.
Module "Geodesy editor" has been improved. In the "Object intersection calculation", "View object intersection" and "Object intersection control" modes, processing of objects with complex geometry - multipolygons has been implemented. The program analyzes intersections with all external and internal contours. The mode "Decorating a parcel with border lines" has been adapted for working with a group of selected objects. The "Fill in report by object metric" mode has been supplemented with the ability to interrupt the process when stream processing several selected objects into one file. In the "Generate a summary GPS measurement protocol" mode, a call blocking is added if there are no selected source objects.
The module "Cadastral documents" has been improved. The address database was updated with current information from FIAS. In the "FIAS Address" dialog, support for addresses of administrative and municipal division has been added. In the "Reading the cadastral plan of the territory and updating the map" mode, the drawing of conditional parts of plots and capital construction objects has been added, if there is no spatial component of parts in the extract according to the extract_about_property_land scheme. The coordinates of the conditional part correspond to the center of the property. To implement this feature, a new object "Conditional part of a land plot" has been added into the survey classifier. Reading of the special_notes element has been added when reading information about uniform land tenure.
The read value is written into the semantics of the land plot "Special marks". There is implemented a reading of information about the person in favor of which the restriction of rights and encumbrance of the property object is established from the right_holders element. The right_holders element is read if there is no restrict_parties element. The received information is recorded into the composite semantics "Content of encumbrances".
Into the "Base of cadastral works" mode, the "Documents" tab has been added to the main form, which displays a list of documents used when performing cadastral works. In the form of editing the contract for cadastral works, the "Documents" tab has been added, in which you can specify the documents related to this contract. In the modes "Map (plan) of the land management object", "Land survey plan", "Technical plan", "Formation of a map-plan of the territory", "Certificate of inspection of the property" and "Correction of registry errors", elements for obtaining documents from the "Base of cadastral works" have been added. In the "Semantics of the object of cadastral works" dialog, unnecessary and obsolete elements have been removed, including information about documents and geodetic points used in the performance of cadastral works. The specified information is maintained in the "Base of cadastral works" and can be quickly inserted into any of the dialogs for the formation of cadastral documents. In the dialog "Description of the location of the boundaries", the formation of a document on the location of the boundaries of settlements and territorial zones is implemented in accordance with the requirements of Order P/0292 dated July 26, 2022, which entered into force on March 1, 2023. Report templates have been updated and the order of inserting images into the report was corrected. Insertion is optional at the request of the user. The mode "Formation of a map-plan of the territory" has been updated. The map folder is used by default for placing the XML document. When generating the XML file of the technical plan of the building, the recording of the element "Area - Area in square meters" was corrected in the absence of the value of the AREADOC semantic. There is corrected a saving into the XML file and object semantics of information about the material of the outer walls and the type of permitted use of the building. When performing cadastral work to clarify the characteristics of a real estate object, the option "Do not include coordinates" has been added on the "Object characteristics" page. In this case, for buildings and constructions registered in the cadastre, information about the spatial component is not recorded into the XML file. In the "Correction of registry errors" mode, methods have been added that ensure the insertion of diagrams and drawings into the report, and rounding the area has been corrected.
The new version of the program is available for download on the Download page.
Into presentation the information about the necessary preparatory work before performing the generalization, requirements to the initial data has been added, and also the processes for the phased execution of the task are considered.
The automated generalization includes automatic modes of data processing which are displayed in the work of the task "Map processing by scenario" and "Automatic labels alignment". The purpose of generalization is to improve the image of the map on a smaller scale, to submit the main features of objects, their characteristic features and relationships. Insignificant or unnecessary for a map of the given destination the information on represented object in the process of generalization is excluded.
You can get acquainted with educational materials in the "Presentation" section.
In KB "Panorama" the classifier of large-scale plans of a scale of 1:5 000 map5000m.rsc, used for publishing maps of regions of the Russian Federation and foreign countries according to OpenStreetMap data, has been improved. There is implemented a support for a multi-level tree of layers for a more convenient search for objects, change of map content, analysis of terrain and updating of digital models of territories. The generalised layers of top level include classes (layers of lower level) of objects by their general properties. For example, the "Vegetation" layer is divided into classes: "Tree and shrub vegetation of natural origin", "Tree and shrub vegetation of artificial origin", "Herbaceous, shrubby, moss vegetation", "Individual trees and characteristics", "Clearings, forest quarters, contour of vegetation", "Agricultural land". Each class can contain objects of different localization - polygons, contours, point symbols, titles. The composition of the classes and the number of the tree levels are selected based on the complexity of the described subject area and maintaining the ease of navigation through the tree of layers. For other classifiers (for example, geological ones), the hierarchy of layers can have a large number of nesting levels. The map5000m.rsc digital classifier and its detailed description are given in the Classifiers section.
On the geoportal "Bank of spatial data", the maps of the region of the Volga Federal District, formed according to OpenStreetMap data using an updated classifier, were updated. The maps included the Kirov, Nizhny Novgorod, Orenburg, Penza, Samara, Saratov regions, the Republic of Bashkortostan, the Republic of Mari El, the Republic of Mordovia, the Republic of Tatarstan, the Udmurt Republic and the Perm Territory. To work with maps, you can use the GIS Panorama Mini program or other software products of KB "Panorama".
Free maps based on OpenStreetMap data are available for download on the "Digital maps" page.