In KB "Panorama" the digital geographic map of scale 1: 1 000 000 in SITZ format onto territory of the the Federative Republic of Brazil has been prepared. As a source for preparation of the map the VMap0 data obtained from the information from the site www.gis-lab.info has served. The map contain information on the number of inhabitants for cities and the name of settlements in Russian. As additional materials the World map of scale 1: 5 000 000 and OpenStreetMap data were used.

The map was led to the classifier of geographic maps of scale 1: 1 000 000 (1mogk13g.rsc). It can be used for a general assessment of the area and the study of natural conditions, to ensure the educational process, as a basis for the creation of geographic maps of a smaller scale, thematic and special maps, and solving other tasks. The map is distributed free of charge under a free license.

Digital geographic maps of scale 1: 1 000 000 in SITZ format are available for download on the page "Digital maps".

In KB "Panorama" the GIS "Panorama" version 14.4.2 has been developed. In the new version the tasks have been included for preparation of topographic maps, aeronautical documents, geological and forest maps, tools of checking quality of vector maps and cadastral documents have been updated.

A new group "Air navigation" has been formed in the list of applications. The task "Building a map of minimum heights" was added into it, as well as a new task "Formation of the mathematical basis of aeronautical charts". Procedure is intended for automatic formation of elements of the mathematical basis and out-of-frame design of aeronautical charts in accordance with the established rules and accepted conventional symbols. Building the mathematical basis and out-of-frame design is carried out for the contours selected on the map. At the same time, design frames, a grid of geodetic coordinates and out-of-frame labels for the ticks of geodetic grid lines are applied onto the design map. It is possible to customize the completeness and visual parameters of the design elements. The design map is created according to the classifier of the source map, however, all design elements are created in the form of graphic objects. Therefore, they can be transferred without distortion onto a map created using any classifier. The frame of the fragment being designed can have any shape and contain an arbitrary number of points (vertices).

The applied task "Numbering of point objects" has been added to the group of applied tasks "Geological tasks". The procedure is designed for automatic numbering of point objects highlighted on the map and can be used, for example, in the process of inventory of infrastructure objects. Numbering consists in assigning an ordinal number to the map object and placing this number in the semantic characteristic of the object with the specified code. Numbering can be started with an arbitrary number.

The task of connection of geoportals has been improved. For the geoportal of Rosreestr "Land plots", the range of data display scales has been expanded to 1:1 - 1:50 000. For possibility of viewing an overview view, data from larger scales with image compression is requested.

The task "Map Editor" has been improved. In the group of modes "Creating an object", the mode "Create clone" has been added. A clone is an object that has a link to the metric of the cloned object and its symbol. Typically, such objects create map design objects, for example, centerlines of roads. This allows you to reduce the amount of stored data and synchronize the editing of the metrics of objects and their design elements. Separating design objects into separate clone objects allows you to display them after the display of all designed objects is completed and improve the image quality (for example, clean the intersections of all roads).

The task "Import of vector maps from OSM format" has been improved. Linear design objects of map are created as clones of designed objects with a common metric for improvement of the image and reduction of data volume.

The program of checking a vector map has been improved. Identification of errors of self-crossing of contours has been improved, the number of duplicate error messages is reduced. Search and correction of degenerate and double contours have been added. Deleting fragments of the contours containing repeated duplication of points has been accelerated. Correction of object metrics is performed in the application "Check of vector map quality" in the "Editing" mode when the topology control "Control of self-intersections and location of subobjects" is selected.

In the "Correction of registry errors" mode from the "Cadastral documents" task, the ability to generate an XML file according to the ReportRegistryError_v01.xsd scheme has been added. The scheme is designed to generate an electronic document - a report on the results of determining the coordinates of the characteristic points of the boundaries and the area of land plots, the contours of buildings, structures, objects under construction, boundaries (parts of boundaries) of municipalities, settlements, territorial zones, forestries. The XML file is created according to the prepared cadastral map, onto which the existing and corrected objects from the "Correction of registry errors" layer of the survey.v6.rsc classifier should be put.

For automation of control and correction of errors in data an interception of failures of visualisation of objects of vector maps with automatic control and correction of structure of object on which a failure was detected has been added. If errors are found and corrected in the object (for example, an error in the coordinates data format after a disk crash), then a pop-up message about the corrected error with the object number will appear in the map window and a record will be added in the events log.

The topographical fonts intended for preparation for printing the topographic maps of various scales have been improved. The sizes of auxiliary symbols have been refined.

The digital classifier forestry.v2.rsc, intended for the state inventory of forests, planning of economic activities, organisation of the protection of forests from fires and forest violations and other problems in the field of forestry conducting has been improved. Changes have been made for formation of a XML-file of the forest declaration approved by the order of the Ministry of Natural Resources and Ecology of the Russian Federation from 04/29/2021 N 303. New semantics have been added into the classifier for the object a forest plot, used at filling of applications to the forest declaration.

The new version of the program is available for download in the Download section.

Geoportal "Bank of spatial data" has been supplemented with maps of the regions of Bavaria, Baden-W?rttemberg, Hesse and Rhineland-Palatinate (Germany) formed according to OpenStreetMap data. To work with the maps, you can use the GIS Panorama Mini program or other software products of KB "Panorama".

The maps were led to the modernised classifier of large-scale plans of scale 1: 5 000 (map5000m). Publishing of updates in bank of spatial data is made by using the program of Databank of digital maps and remote sensing data. Publishing contents of bank of spatial data on the geoportal and data access for downloading are implemented by means of GIS WebServer SE.

Free maps on the basis of OpenStreetMap data in MPTZ and SITZ format are available for download on the page "Digital maps".

In KB "Panorama" the GIS "MapView" version 1.3 has been developed for Android OS. In the new version automatic updating the data from the GIS Server has been implemented, support of WMS format and recording the route of movement has been added when the screen of the mobile device is turned off.

Within the limits of expansion of GIS Server support a possibility of using the dynamic updating of spatial data has been added. GIS Server provides remote access to vector maps, remote sensing data, matrixes, documents and spatial data bases for users of GIS "Panorama", GIS "Operator", GIS WebService SE and others. Users of desktop and web applications on different platforms can edit data simultaneously. GIS MapView automatically updates the image on the device according to the current state of the data. Update period setting allows you to choose a convenient time of updating the data for the purpose of optimum use of network resources.

In GIS "MapView" a support of opening WMS layers of geoportals has been added. As a result users of the mobile application receive additional possibility of displaying sources of dynamically changing spatial data. One of the means of implementing geoportals is GIS WebService SE, which transfers data according to the international standard OGC WMS. GIS WebService SE supports many data formats: vector, raster, matrix, project files, tiles (for example, MAP, RSW, MTW, MPT, PNG, JPEG, and others).

Ability has been added to record the route in the background. The new version of the GIS "MapView" makes it possible to minimize the application or turn off the screen of the mobile device after the start of recording the route. This allows you to continue using your mobile device or continue driving without being distracted by the route recording status. Also, recording when the smartphone screen is off allows you to save battery power. Route recording is accompanied by a reminder in the operating system for indicating the current background recording process of the route. At any time, you can open the application to check the current progress of the recording process and, if necessary, complete the construction of the route.

GIS "MapView" allows you to open the main formats of digital maps of the GIS "Panorama" on Android-based mobile devices and process the information from the built-in GPS/GLONASS receiver. The user can prepare in advance a necessary set of the spatial data in one of desktop products (GIS "Panorama", "Panorama-editor", GIS Panorama Mini), pack them into archive of ZIP format by standard tools and to transfer into mobile GIS "MapView". The process of working with data is carried out offline, without connecting to the Internet. When the user moves, his current position is dynamically displayed according to the coordinates received from the GPS/GLONASS receiver. For ease of use, it is possible to synchronize the position of the map with the current location. To save the coordinates obtained during the movement, a track recording mode is provided, which creates a separate map and puts the trajectory of movement onto it. For all objects of a map during the work the basic information is provided.

The new version of the program is available for download in the Download section.

In KB "Panorama" the "Workstation of cadastral engineer" versions 14.4.1 has been developed. In the new version, in the dialog of the mode "Correction of registry errors", the possibility of generating an XML file according to the scheme ReportRegistryError_v01.xsd has been added. Procedure for changing in the Unified State Register of Real Estate of information about location of the boundaries when correcting a registry error was approved by order of Rosreestr dated 01.06.2021 No. P/0241. The form and content of the Report on the results of determining the coordinates of the characteristic points of the boundaries and the area of cadastral objects in order to correct registry errors are given in Appendix 4 to the order.

A report in XML format includes a package of information, source data, a boundary scheme, and other information necessary to correct registry errors. The information package includes the following elements: SpecifyParcels - Information about the location of the boundaries and area of land plots, parts of land plots; AdditionalParcels - Information about land plots, the location of which is determined additionally; RealtyRegistryError - Information about the location of buildings, constructions, objects of under construction and BoundariesRegistryError - Information about the location of the boundaries (parts of the boundaries) of municipalities, settlements, territorial zones, forestries.

The XML file is created according to the prepared cadastral map, onto which the existing and corrected objects should be applied using the survey.v6.rsc classifier, the "Correction of registry errors" layer. When written in XML, multiplanimetric objects can be represented as multipolygons or sets of objects. Establishing a correspondence between the existing and corrected contours of cadastral objects is carried out using the cadastral and registry numbers of objects and registration numbers of contours. The assignment of a cadastral object into the required section of an electronic document is performed by the type of object and with semantics use. For land plots - "Sign of correction". For the boundaries of a municipality, settlement, territorial zone, forestry - "Type of object of the registry of boundaries" and "Type of description of the boundary".

The new version of the program is available on the website in the Download section.