Copyright © Panorama Group 1991 - 2023
In KB "Panorama" the
A new group "Air navigation" has been formed in the list of applications. The task
The applied task
The task of
The program of
For automation of control and correction of errors in data an interception of failures of visualisation of objects of vector maps with automatic control and correction of structure of object on which a failure was detected has been added. If errors are found and corrected in the object (for example, an error in the coordinates data format after a disk crash), then a pop-up message about the corrected error with the object number will appear in the map window and a record will be added in the events log.
The topographical fonts intended for preparation for printing the topographic maps of various scales have been improved. The sizes of auxiliary symbols have been refined.
The digital classifier forestry.v2.rsc, intended for the state inventory of forests, planning of economic activities, organisation of the protection of forests from fires and forest violations and other problems in the field of forestry conducting has been improved. Changes have been made for formation of a XML-file of the forest declaration approved by the order of the Ministry of Natural Resources and Ecology of the Russian Federation from 04/29/2021 N 303. New semantics have been added into the classifier for the object a forest plot, used at filling of applications to the forest declaration.
The new version of the program is available for download in the
The maps were led to the modernised classifier of large-scale plans of scale 1: 5 000 (map5000m). Publishing of updates in bank of spatial data is made by using the program of Databank of digital maps and remote sensing data. Publishing contents of bank of spatial data on the geoportal and data access for downloading are implemented by means of
Free maps on the basis of OpenStreetMap data in MPTZ and SITZ format are available for download on the page "Digital maps".
Within the limits of expansion of GIS Server support a possibility of using the dynamic updating of spatial data has been added. GIS Server provides remote access to vector maps, remote sensing data, matrixes, documents and spatial data bases for users of
In GIS "MapView" a support of opening WMS layers of geoportals has been added. As a result users of the mobile application receive additional possibility of displaying sources of dynamically changing spatial data. One of the means of implementing geoportals is GIS WebService SE, which transfers data according to the international standard OGC WMS. GIS WebService SE supports many data formats: vector, raster, matrix, project files, tiles (for example, MAP, RSW, MTW, MPT, PNG, JPEG, and others).
Ability has been added to record the route in the background. The new version of the GIS "MapView" makes it possible to minimize the application or turn off the screen of the mobile device after the start of recording the route. This allows you to continue using your mobile device or continue driving without being distracted by the route recording status. Also, recording when the smartphone screen is off allows you to save battery power. Route recording is accompanied by a reminder in the operating system for indicating the current background recording process of the route. At any time, you can open the application to check the current progress of the recording process and, if necessary, complete the construction of the route.
GIS "MapView" allows you to open the main formats of digital maps of the GIS "Panorama" on Android-based mobile devices and process the information from the built-in GPS/GLONASS receiver. The user can prepare in advance a necessary set of the spatial data in one of desktop products (GIS "Panorama",
The new version of the program is available for download in the Download section.
In KB "Panorama" the "Workstation of cadastral engineer" versions 14.4.1 has been developed. In the new version, in the dialog of the mode "Correction of registry errors", the possibility of generating an XML file according to the scheme ReportRegistryError_v01.xsd has been added. Procedure for changing in the Unified State Register of Real Estate of information about location of the boundaries when correcting a registry error was approved by order of Rosreestr dated 01.06.2021 No. P/0241. The form and content of the Report on the results of determining the coordinates of the characteristic points of the boundaries and the area of cadastral objects in order to correct registry errors are given in Appendix 4 to the order.
A report in XML format includes a package of information, source data, a boundary scheme, and other information necessary to correct registry errors. The information package includes the following elements: SpecifyParcels - Information about the location of the boundaries and area of land plots, parts of land plots; AdditionalParcels - Information about land plots, the location of which is determined additionally; RealtyRegistryError - Information about the location of buildings, constructions, objects of under construction and BoundariesRegistryError - Information about the location of the boundaries (parts of the boundaries) of municipalities, settlements, territorial zones, forestries.
The XML file is created according to the prepared cadastral map, onto which the existing and corrected objects should be applied using the survey.v6.rsc classifier, the "Correction of registry errors" layer. When written in XML, multiplanimetric objects can be represented as multipolygons or sets of objects. Establishing a correspondence between the existing and corrected contours of cadastral objects is carried out using the cadastral and registry numbers of objects and registration numbers of contours. The assignment of a cadastral object into the required section of an electronic document is performed by the type of object and with semantics use. For land plots - "Sign of correction". For the boundaries of a municipality, settlement, territorial zone, forestry - "Type of object of the registry of boundaries" and "Type of description of the boundary".
The new version of the program is available on the website in the Download section.
In KB "Panorama" the
In the program the saving of digital maps into a file of vector format PDF has been added. Due to the fact that the vector PDF format preserves the display quality at any display scale, the new mode can be used in the process of preparing reporting documents. For example, a user can combine a set of open maps, save them in vector PDF format, and transfer the resulting file for viewing in original quality at any scale using standard operating system tools. The new mode allows you to save the entire map or only the required fragment according to a rectangular fragment, object, or the size of the current window. Printing is performed at an arbitrary scale: for example, the user can select a map fragment at a small scale, and output it to a file at a larger one.
Display of rasters with smoothing has been added. At increasing the image of a raster more than in two times from the initial size in pixels the smoothing is carried out. The new algorithm of display allows to get rid of "pixelization" effect when you increase the rasters. Image smoothing is performed by bicubic interpolation method (by 16 nearest raster elements). Smoothing is enabled or disabled via the main menu: "View" - "Raster smoothing".
Abilities of displaying titles have been expanded. New properties of design the titles allow to mark the title by a shade, outline, a background and a frame, and also to format the text taking into account a spacing sign (an insert of spaces) and the chosen register (uppercase, lowercase, as in a sentence). There is added the ability to change the thickness of solid and dashed contours of objects by the value of the service semantics "Line thickness in mm" (31005).
Possibilities of applying user semantics have been expanded for recording arbitrary object properties which are not described in the list of semantics of RSC classifier. User semantics are created when importing vector data (SHP, KML, MIF and others), when the field names (keys) of object attributes are not found in the selected RSC classifier. To support such semantics, temporary semantics are created in the RSC classifier in the range of codes 660000 and higher for the duration of a GIS session. Semantics name is filled by name of fields in the source vector data. When simultaneous opening several maps with one classifier, the list of temporary semantics will be supplemented with user semantics from all maps. When opening different combinations of maps, temporary codes in different sessions may have different values. When exporting vector maps to SXF and TXF files, user semantics is written with code 32862 and data record of the form "field_name:value". When imported, such semantics are transfered back into temporary semantics with the addition of new code to RSC. On the map, semantics are written with codes in the range from 60000 and above. The correspondence between the semantics code on the map and the field name is stored in the map metadata. When opening a map by the list of field names of user semantics, temporal semantics are automatically added into RSC.
In the "Classifier editor" task, tools for the description of clusters, formations of XSD-scheme by the classifier and editing of a layer's external view have been added. When grouping more than one object of a given type in a virtual cell of a cluster, their conventional symbols will be automatically replaced by a symbol of the cluster, the center of which will have the average coordinate of the objects included into it. When you change the scale, the configuration of the clusters automatically changes. The conventional sign of the cluster can be programmable, which allows you to select the type of cluster in various ways and change the properties of the sign depending on the number of objects in the cluster (signature of the number, size of the sign, brightness). In this case, the cluster icon can contain only the number of objects or other complementary elements of the conventional symbol. When drawing an object, various semantics can be taken into account, including links to graphic files, which makes the generalized sign more complex and informative. Maps with clusters customized in the RSC classifier are automatically supported in all desktop and web applications, as well as in applications developed in the
Possibility of editing primitives "Table", "Line-colorglass" and "Cross polygon" has been added. The "Table" display type can be assigned to a point object that has a reference to CSV file in its semantics. Each column of the table can contain textual and numerical data, pictures (in PNG, JPG, BMP format), colored shapes and percentage scales. A table can have multiple pages. The map with the created tables will have one view in desktop, mobile, web-applications on any platforms, with local placement or on the
GIS Panorama Mini is the universal geoinformation system intended for a collecting the spatial data, a conducting the spatial database, creation and updating of digital maps and plans, creation of information systems of various purposes. The program implements the following main functions: import and viewing of vector maps, raster data, matrixes of heights, matrixes of qualities, geological matrixes of layers, TIN-models, laser scanning data, user maps and work regions; creation of new maps with automatic filling of parameters using the EPSG code or from the list of parameters in XML format; export of maps to SXF, DXF, OGC GML formats; multi-user work with data with access control through a connection to the GIS Server; combining and editing vector maps of different projections in one document; support for popular geoportals, which allows displaying user maps over images received from sites; printing to various output devices with customization of print parameters.
The new version of the program is available for download in the Download section.