Copyright © Panorama Group 1991 - 2021
In KB "Panorama" the "Workstation of cadastral engineer" version 13.6.4 has been developed. In the new version the new mode "Building a road profile" has been developed, included into the group of modes "Creation diagrams and drawings". The mode is intended for automatic building the longitudinal profile of the projected route of a motor or railroad according to the line object indicated on the map. The formed drawing contains two lines of a vertical profile, along the existing surface of a relief and a design line built by interpolation methods. The design line of the route profile contains extended linear sections with a selection of relief slopes that are optimal for their overcoming by transport. The profile also displays a plan of the route (a map image in a strip of a given width along the route), design elements and help information.
To analyze the project line of the road, information about bridge crossings and tunnels is collected along the route. The received information is displayed on the profile in the form of special conventional symbols. The prepared drawing can be saved as a separate map or as graphic documents with division into pages of a given size in JPG, PNG, TIF format or as a multi-page PDF document.
To perform computational and analytical tasks, the use of expressions describing formulas and mathematical operations on the values of object attributes has been expanded. The calculations use semantics and metric characteristics: area, perimeter, coordinates of the first point, coordinates of the center of the contour, object number and others. The "Object Search" dialog has been improved for entering mathematical formulas and the values to which the calculation result must correspond. In the "Classifier Editor" the list of mathematical operations for describing the semantics-formula used for updating the coordinates of an object or its conventional sign has been expanded.
The mode "Search by cadastral number or address" has been improved, the possibility has been added for a choice of a source of search: on a map or in Rosreestr. When using the search in the Rosreestr, the information found at the specified cadastral number or address is displayed in the "Information from State Real Estate Cadastre" dialog, with moving the map to the location of the found object.
The digital classifier of the forestry.v2 map has been improved, which is used to create annexes to the forest declaration, approved by the order of the Ministry of Natural Resources and Environment (Russia) of July, 30th, 2020 N 539. To generate graphical annexes to the forestry declaration, new report templates have been developed and the processing of new markers has been added. The #Area_ga# marker provides the output into the report of the area of the object in hectares, and the #STR3BL# marker outputs the geodetic coordinates of the characteristic points of the boundaries into the report.
In KB "Panorama" the
The mode "Calculations on semantics of selected objects" in the Map Editor task has been improved. The time for calculating and filling the semantics of objects according to a mathematical formula specified by the user has been reduced by 7 times. More complex mathematical expressions are supported, including various mathematical operations on the values of the semantics of an object and its measuring properties.
In the "Classifier Editor", the list of mathematical operations for describing the semantics of the formula has been expanded. The value of such semantics is automatically calculated when updating the coordinates or semantics of the object and can participate in the formation of the conventional symbol of the object through a series of objects (a matrix of conventional symbols, depending on the combination of the semantics values) or based on programmable symbols.
The task "Geodesy editor" has been improved. In a mode "Search by cadastral number or address" the possibility has been added for a choice of a source of search: on a map or in Rosreestr. When using the search in the Rosreestr, the information found at the specified cadastral number or address is displayed in the "Information from State Real Estate Cadastre" dialog. If you have an access key to the Yandex.Maps API geocoder, the map is moved to the center of the found object. The tools have been implemented for the formation of graphic applications to the forest declaration, approved by the order of the Ministry of Natural Resources and Environment (Russia) of July, 30th, 2020 N 539. "To print the summary report on the allocated objects" mode provides the formation of attachments 1 and 2 to the forest declaration, and the "To print the LAND-SURVEYING on semantics of object" mode of attachments 3 and 4 to the forest declaration. To generate reports, new report templates have been developed, located in the Geodesy.dot folder. There is added a processing of the #Area_ga# marker for displaying the area of the object in hectares in the report and the #STR3BL# marker for displaying the geodetic coordinates of the characteristic points of the object boundaries in the report.
The forestry.v2.rscz digital map classifier has been improved, which is used to prepare a digital map containing the information necessary for filling out a forest declaration. There is implemented a reading and saving a ZIP-package of a document, including an XML file with its details and attached PDF files, without using an external archiver.
A new mode "Building a road profile" has been developed, included into the group of modes "Creation diagrams and drawings". The mode is intended for automatic building the longitudinal profile of the projected route of a motor or railroad according to the line object indicated on the map. The generated drawing contains the profile line of the existing relief surface, the design line of the route profile containing extended linear sections with the selection of optimal slopes, the route plan (a map image in a strip of a given width along the route), design elements and help information.
Along the route line a gathering of data on bridges transitions and tunnels is carried out. The received information is displayed on the profile in the form of special symbols. The prepared drawing can be saved as a separate map or as graphic documents with division into pages of a given size in JPG, PNG, TIF format or as a multi-page PDF document.
The new version of the program is available for download in the
KB "Panorama" has developed a training program for the course "Geoportals and distributed (Cloud) GIS Technologies", which includes a series of lectures and practical exercises. Students of the
Students are told in an accessible form about current knowledge in the field of distributed geoinformation systems: from their general characteristics to specific software and its real application. The lecture material is prepared in the form of presentations, the lectures itself are recorded on video. As the course progresses, materials will be published in the KB Panorama knowledge base. Lectures on the following topics are already available for viewing and downloading: "General characteristic of geoportals and distributed GIS-technologies", "Data organization in distributed geoinformation systems", "Architecture of distributed GIS".
KB "Panorama" and MIIGAiK are long-standing strategic partners. Joint activities are aimed at popularizing domestic cartographic and geodetic education and software for geoinformation systems. So on April, 12th, at the
Training materials are available for review in the sections "Video lessons" and "Presentations".
In KB "Panorama" the
For GetBound request, an output of preferable formats depending on data type has been added. This will allow the GIS WebServer SE administrator to correctly set the data format (PNG or PNG8). A new request has been added that allows to form the user layers using a GEOJSON file.
Support for working with three types of DBMS directly PostgreSQL, Oracle, MS SQL Server has been implemented. The service administrator has been improved. There is added the ability to disable analytics of the service in order to save server resources. A button has been added to the service panel to clear the layer cache.
GIS WebService SE supports all international standards (OGC WFS, WFS-T, WMS, WMTS, WCS), which are used to transfer and display spatial data. In the program the possibility has been implemented for issuing tiles by any user or local coordinate system. The application has been implemented on Windows and Linux platforms, is compatible with Apache, IIS and nginx web servers.
The new version of the program and the documentation are placed on the website in the
Specialists of KB "Panorama" prepared and placed on the geoportal
The maps were led to the modernised classifier of large-scale plans of scale 1: 5 000 (map5000m.rsc) and were saved into a packed project (MPTZ). The MPTZ format project includes a digital map of the region's territory (country, subject of the federation, administrative region), a map of the administrative-territorial division of the region and a digital classifier. Publishing of updates in bank of spatial data is made by using the program of
Free maps on the basis of OpenStreetMap data are available for download on the page "Digital maps".