Copyright © Panorama Group 1991 - 2020
In KB "Panorama" the
The register of objects of a single immovable complex provides storage of the accounting and technical characteristics of the complex and all cadastral objects included into its composition. Due to the spatial and logical connections, there is ensured an integration with the registers of land, buildings and structures. The composition of the stored data includes various cadastral documentation, schemes, plans, drawings, images, accounting and technical characteristics and information about the copyright holders. The location of a single immovable complex on the map is provided.
In the "Workstation of urban planner", along with various real estate objects, information on land plots and their owners is stored. Maintaining urban development regulations for the use of territories allows us to establish rules for the use of land plots and capital construction objects.
Automation of the formation of spatial and logical relationships between the considered real estate and land plots simplifies the use of the software package. The "What the subject owns" mode allows you to get complete information about the property of the copyright holder.
To create a cadastral plan of the territory, a loading of information from the XML files of the Federal Register is used. The synchronization mode allows you to configure the relationship between the semantics of cadastral map objects and the information stored in the database.
A special place in the program is occupied by the section with documents, which allows you to store various attributive information about documents. Documents can be grouped by type, purpose, regional affiliation and other user data. A document record may contain various attributes that the user himself creates and assigns to a group of documents. Files that can be viewed and edited in a specialized program are attached to the document record. One document can be used for several land plots and objects of real estate. Flexible customization of stored information in a database allows to use the "Workstation of the urban-planner" not only for the urban development purposes, but also for accounting for lands and objects of real estate.
The new version of the program and updated documentation are available on the website in the
On the geoportal
The composition of the maps includes Irkutsk, Kemerovo, Omsk, Novosibirsk, Tomsk Oblasts, Altai Republic, Tuva Republic, Republic of Khakassia, Altai Krai and Krasnoyarsk Krai. The source data was obtained from the
The maps were led to the modernised classifier of large-scale plans of scale 1: 5 000 (map5000m.rsc). Publishing of updates in bank of spatial data is made by using the program of
Free maps on the basis of OpenStreetMap data are available for download on the page
Specialists of KB "Panorama" prepared the video lesson
The first part of the lesson discusses the the mode's work "Import of vector maps from MIF/MID format". The converter allows you to import data into a user map created automatically by the program or by the user manually. During converting, the import of the attributive information about objects and its saving in semantics of objects is carried out. In this case, the source data can be both in geodetic coordinates, and in rectangular.
The final part of the video lesson demonstrates how to work with dialog "Save Map to MIF/MID format". In addition to the basic information about the current file of the work region ("Name", "Source map" and "Output folder"), the following groups of control elements are examined in detail: "Input Data", "Statistic", "Data processing status", "Options". They provide the user with various data about the current handling procedure. To export vector maps, you can use the default options or change them as you wish.
Previously the video lessons of this series were published:
You can get acquainted with training materials in English in the section
In KB "Panorama" the
Panorama Imagery Service is a Linux service designed to create and update tile pyramids in PNG, PNG8 or JPEG formats using spatial data managed by the GIS Server program. Pyramids of tiles are published using OGC WMTS protocol by service the
The program supports standard tile pyramids: GlobalCRS84Scale (standard matrix for representing spatial data in EPSG:4326 projection), GlobalCRS84Pixel (matrix for intuitive representation of spatial data), GoogleCRS84Quad (matrix compatible with Google data in EPSG:4326 projection), GoogleMapsCompatible (matrix compatible with Google data in EPSG:3857 projection, also used in Google Maps) and others. To read the source data, Panorama Imagery Service can connect to the GIS Server or open data sets on the local network. The program monitors data changes - by the transaction log for vector data, by the time of updating raster and matrix data, and automatically updates the tiles on which the changes occurred.
New versions of programs are available on the website in the
In KB "Panorama" the
Ability is added to receive and display packed pyramids of tiles from
The task of connecting geoportals has been improved. List of connected geoportals is updated. Data from geoportals can be connected as a background to user data for solving various application tasks (validation, printing reports, reconciling data and others). Vector layers obtained by the OGC WFS protocol can serve as initial data. The program supports a monitoring of changes and tracking moving objects in a near-real time mode. If the geoportal or service supports the OGC WFS-T transaction protocol, then the task allows not only to receive, display objects and monitor their updates, but also to edit them, transferring changes to the server to display these changes to other clients. Displaying all geoportals is accelerated. There is added the ability to display and save data from Rosreestr geoportals without duplicating signatures on the screen in various projections, including for local coordinate systems. Displaying the Rosreestr geoportal is significantly accelerated upon repeated calls.
Support for GSK-2011 and PZ-90.11 coordinate systems is implemented. The creation of maps in the GSK-2011 system, the conversion of projections and coordinate systems of maps, matrixes and rasters is provided. The new national coordinate systems were adopted by Decree of the Government of the Russian Federation of December 28, 2012 N 1463 "On unified state coordinate systems".
A new type of maps, Topographic PZ-90.11 (Pulkovo2017), based on the use of the ellipsoid PZ-90.11 and the Gauss-Krueger projection, has been added into the "View Passport" task. As system of heights the Average level of world ocean (geoid) corresponding to the EGM2008 model is established. Support for a new type of map is added into the task "Creation of rule". In the dialogs for recalculating and displaying the coordinates of the current point on the map, the coordinate system PZ-90.02 was replaced by PZ-90.11.
Into the map passport the property "Use alternative fonts" is added. This property is necessary, for example, for the correct display of OSM maps in national languages using the standard classifier map5000m.rsc. The classifier includes topographic fonts in which not all language encoding are implemented. The installation includes the altfonts.xml file, in which for such fonts the alternative fonts supporting the required encoding are specified.
To split the set of point signs into groups and display them, the algorithm of an automatic clustering is implemented. In the "Classifier Editor" tools of clusters description are added. Description includes: views of objects relating to each type of cluster, cell sizes vertically and horizontally, semantics code to indicate the current number of objects in the cluster, view of a conventional sign of a cluster, a limiting percent of magnifying the size of a cluster's sign and the limiting number of objects, and the limiting number of objects, corresponding to the maximum size of the cluster sign. The cluster symbol can be programmable, that allows you by various ways to set off a type of a cluster and to change properties of a sign depending on number of objects in a cluster (signature of the number, size of a sign, brightness). When grouping in a virtual cluster cell more than one object of a given type, their conventional signs will automatically be replaced by a conventional sign of the cluster, the center of which will have an average coordinate of the objects included in it. When you change the scale, the cluster configuration automatically changes. Maps with clusters customized in the RSC classifier are automatically supported in all desktop and web applications, as well as in applications developed in the
Algorithm of creating signatures of objects according to their semantic characteristics is changed. At updating semantics of object there are automatically updated the corresponding semantics of all signatures created for the object in the "Map Editor" or in the task of "Creation of titles by objects semantics". The task of creating titles by objects semantics, taking into account the processing of multipolygons selected on the map, has been improved. A title is formed for each contour that belongs to the multipolygon and is put in accordance with the dialog settings.
"Map Editor" task is improved. In the mode of creating a linear object, a new option "Add to object" is added, which provides a joining of the created contour to the contour of the already existing linear object on the map. The mode of the map editor "Paste & Cut - Cut of polygon object by object" has been improved. When cutting a polygon object, support of multipolygons is added. When an ordinary polygon object is cut, the result is ordinary polygonal ones. When cutting a multipolygon, the result is a multipolygon.
"Select Object" dialog has been improved. In order to increase the information content of the object’s scheme, the color of the contours has been changed in the "Metric" bookmark: for ordinary objects, the main contour now is displayed in blue color, and subobjects - in pink color. In multipolygons, all external contours are displayed in blue color, the rest - in pink. The new color scheme allows you visually to verify the correctness of the subobjects occurrence. On the "Semantics" bookmark, the ability to disable sorting of the object characteristics table has been added. Data will be displayed in the sequence of their addition to the map object. Enabling/Disabling sorting can be done through the "Sort" context menu item.
The mode "Image shutter" is improved. By means of this mode the analysis of various overlapping opaque images can be made by shifting their borders. Possibility to apply the "shutter" for matrixes and geoportals is added. The mode is started through the main menu View/Image shutter. The task "Saving vector map into file of BMP, TIFF, RSW format" has been improved. The mode of page-by-page saving of the map image to graphic files by page format is added.
Updating the Panorama Mini version 12 to version 13 till June, 1st, 2020 is free for users who purchased the Panorama Mini version 12 after December, 1st, 2018, as well as for those who have a valid technical support agreement for version 12. The new version of program is available for download on the