Copyright © Panorama Group 1991 - 2019
On the geoportal
The composition of the maps includes Kirov, Nizhny Novgorod, Orenburg, Penza, Samara, Saratov, Ulyanovsk Oblasts, the Republic of Bashkortostan, the Republic of Mari El, the Republic of Mordovia, the Republic of Tatarstan, the Udmurt Republic, the Chuvash Republic and Perm Krai. The source data was obtained from the
The maps were led to the modernised classifier of large-scale plans of scale 1: 5 000 (map5000m.rsc). Publishing of updates in bank of spatial data is made by using the program of
Free maps on the basis of OpenStreetMap data are available for download on the page "Digital maps and images".
In KB "Panorama" the
To split the set of point signs into groups and display them, the algorithm of an automatic clustering is implemented. In the "Classifier Editor" tools of clusters description are added. Description includes: views of objects relating to each type of cluster, cell sizes vertically and horizontally, semantics code to indicate the current number of objects in the cluster, view of a conventional sign of a cluster, a limiting percent of magnifying the size of a cluster sign and the limiting number of objects, and the limiting number of objects, corresponding to the maximum size of the cluster sign. The cluster symbol can be programmable, that allows you by various ways to set off a type of a cluster and to change properties of a sign depending on number of objects in a cluster (signature of the number, size of a sign, brightness). When grouping in a virtual cluster cell more than one object of a given type, their conventional signs will automatically be replaced by a conventional sign of the cluster, the center of which will have an average coordinate of the objects included in it. When you change the scale, the cluster configuration automatically changes. Maps with clusters customized in the RSC classifier are automatically supported in all desktop and web applications, as well as in applications developed in the GIS ToolKit and GIS Constructor. Algorithm of creating signatures of objects according to their semantic characteristics is changed. At updating semantics of object there are automatically updated the corresponding semantics of all signatures created for the object in the Map Editor or in the task of Creation of titles by objects semantics. The task of creating titles by objects semantics, taking into account the processing of multipolygons selected on the map, has been improved. A title is formed for each contour that belongs to the multipolygon and is put in accordance with the dialog settings.
New task called "Matrix of depths building" was developed, intended for creating matrixes of depths by a set of sea maps of IHO S52 standard. The creating a depth matrix is carried out taking into account the possible overlap of sea maps of different detail (different scale) to obtain the most accurate description. Imposing of following types of objects of sea maps is taken into account: isobath, depth mark, land area, island, sunken ship, danger, underwater drying rock and others. In the elements of a matrix corresponding to the area of a land, values of depths are absent. Depth matrixes are displayed for clarity using a special palette that corresponds to 32 nonregular depth ranges. The first 16 ranges are intended to display depths up to 20 meters (coastal zone) and they have gradations of 0.5, 1, 2 meters. The remaining ranges are intended to display areas of medium depth up to 500 meters (gradations of 5,10,50,100 meters) and deep-water zones up to 12,000 meters (gradations from 500 meters and more). To automate the formation of a work region from a set of sea maps, support has been added for importing a list of sea maps of the S57 (000) format from a DIR text file, similar to the SXF list.
A new task, "Import of a spatial database", was developed to automate the import and display of large volumes of spatial data from databases. The task allows you to perform a direct connection to the spatial database, specify the parameters of the map being created (EPSG code, classifier, and conventional symbols), specify the necessary tables, and put the spatial objects onto the map using the information from these tables. There is supported an import from the spatial databases working under management of DBMS PostgreSQL and Oracle, which provide access to the spatial data according to standard of OGC 06-103r4: "OpenGIS Implementation Standard for Geographic information - Simple feature access - Part 1: Common architecture".
"Map Editor" task is improved. In the mode of creating a linear object, a new option "Add to object" is added, which provides a joining of the created contour to the contour of the already existing linear object on the map (it is activated by pressing the "U" key). The type (code) of an existing object may not coincide with the type of created one. After adding, the type of an existing object, as well as the direction of digitization and the set of semantic characteristics, do not change. Addition of the digitized section is performed to the nearest end of the chosen object. If the created or existing objects consist of components (subobjects), the contour (contours) of the created object will be added to the existing one as subobjects. The mode of the map editor "Paste & Cut - Cut of polygon object by object" has been improved. When cutting a polygon object, support of multipolygons is added. When an ordinary polygon object is cut, the result is ordinary polygonal ones. When cutting a multipolygon, the result is a multipolygon.
In the "Navigator 3D" task, the mode of loading models from Collada format into the database of three-dimensional DB3D tiles has been supplemented. The ability to change the speed (acceleration or deceleration) of the scenario playback has been added into the modes for setting and playing scenarios of the movement of dynamic objects. This allows you to quickly get the results of the scenario execution or to examine in detail individual scenes.
In the task "Map Computer", the algorithm for creating emptinesses contours not filled with certain objects has been improved. Time of construction is reduced by 10 times, the accuracy of creating emptinesses contours is increased.
"Select Object" dialog has been improved. In order to increase the information content of the object’s scheme, the color of the contours has been changed in the "Metric" bookmark: for ordinary objects, the first (main) contour now is displayed in blue color, additional contours (subobjects) in pink color. In multipolygons, all external contours are displayed in blue color, the rest - in pink. The new color scheme allows you visually to verify the correctness of the subobjects occurrence. On the "Semantics" bookmark, the ability to disable sorting of the object characteristics table has been added. Data will be displayed in the sequence of their addition to the map object. Enabling and disabling sorting can be done through the "Sort" context menu on the "Semantics" bookmark. This allows you to correctly display repeated grouped characteristics, as well as to search in the table for values of characteristics by code or name of the characteristic.
The mode "Image shutter" is improved. By means of this mode the analysis of various overlapping opaque images can be made by shifting their borders. Possibility to apply the "shutter" for matrixes and geoportals is added. The mode is started through the main menu View/Image shutter/matrix and View/Image shutter/geoportal.
The task of connecting geoportals has been improved. Vector layers obtained by the OGC WFS protocol can serve as initial data. GIS can connect to a remote service and load metric, semantic information and metadata to a selected territory. The program supports a monitoring of changes and tracking moving objects in a near-real time mode. If the geoportal or service supports the OGC WFS-T transaction protocol, then the task allows not only to receive, display objects and monitor their updates, but also to edit them, transferring changes to the server to display these changes to other clients.
The task "Adjustment of isolines and linear hydrography objects" from the group of tasks "Check and correction of data" has been improved. The task automates the adjustment of isolines on the map with the isolines of hydrography, which significantly reduces the complexity of the work. There is added a marking of intersection points of agreed contour lines and rivers to exclude these sections from possible reprocessing. Automatic checking of a deformed isoline arc relative to the river is added to restore its initial position in the event of a deterioration of the state of the intersection place. An isoline deformation control was implemented in the thalweg area to be canceled if an isoline intersection with a river is obtained twice. Additional attempts were added to change an isoline around a thalweg and to mark it for an exception of these areas from possible repeated processing.
The program for correcting the metric of objects has been improved: processing of multipolygons has been accelerated. For example, time of correcting the metric of a test set of maps with more than 3 million objects was reduced from 5 hours to 30 minutes. The program of correcting the metric of objects removes double points and emissions, corrects all types of self-intersections, imposing, intersections of contours and errors in the occurrence of subobjects, which ensures subsequent cutting of data by the specified regions and merge of objects when updating and combining data.
Block of geodesy and cadastral tasks has been improved. The new mode "Base of cadastral works" is developed, intended for conducting information on contracts for the implementation of cadastral works. Input and editing of data on information groups are provided: contract, cadastral engineer, customer and measuring instruments. Elements for quick selection of previously entered information from the cadastral database and insertion of selected values into dialog elements are built into the dialogs "Land survey plan", "Technical plan", "Map (plan) of the land management object".
Dialogue "Technical plan" has been improved, in which the process of entering and filling information about the building and the premises and parking spaces located in it, including for an apartment building, is automated. The boundaries of the building are plotted on the "Drawing of the building" map, and the boundaries of the premises (parking spaces) are plotted on floors plans. At the same time, a separate plan for each floor containing several rooms (parking spaces) is created. The dialog "Reading the cadastral plan of the territory and updating the map" has been improved. There is added a processing of cadastral data according to XML scheme extract_base_params_land_v01 - extract from the Unified State Register of Real Estate on the main characteristics and registered rights to a real estate object (land) in electronic form. When generating a text report and XML document "Land survey plan", an analysis of the type of land was added when filling the section "Information about the measurements and calculations".
In dialog "To print the report in Excel under the metrics of object" the quantity of allowed lines on one sheet has been increased up to 1 000 000. Possibility of displaying information on several selected objects in one file Excel is implemented. New templates for summary reports have been developed: forestry.dot - register of forest land areas, subjects.dot - registry of land intersections of the forest fund with the borders of the subject of the Russian Federation, settlements.dot - register of intersections of lands of forest fund with the boundaries of settlements, zones.dot - register of intersections of lands of forest fund with the boundaries of territorial zones, plots.dot - register of intersections of lands of forest fund with the boundaries of land plots of other categories.
There is added the ability to disable caching on the client disk of raster data opened on the GIS Server. This mode of operation is used at high network speeds and limited disk space on the client.
Classifiers and libraries of conventional symbols for various types of special maps were updated: land survey plans, technical plans, certificates of inspection, public and other cadastral maps, cadastral plans of territories, cadastral passports of objects of capital construction, cadastral extracts on land plots, cadastral extracts of capital construction objects, general schemes for the development of the railway network at the regional, federal and international levels, in the field of civil defense, the prevention and liquidation of consequences of natural and man-made emergencies, and others.
Updating the GIS Panorama version 12 to version 13 till June, 1st, 2020 is free for users who purchased the GIS Panorama version 12 after December, 1st, 2018, as well as for those who have a valid technical support agreement for version 12. The new version of the program is available for download in the
In KB "Panorama" in cooperation with
At present, IERT JSC is the main specialized scientific and research institute carrying out comprehensive research on the strategic development of the railway network in the Russian Federation, multifactorial assessment of relevant investment projects, as well as improving the regulatory framework for the current maintenance and repair of infrastructure facilities.
The digital classifier on the network of Russian Railways is available for download in the "Classifiers" section.
The maps were led to the modernised classifier of large-scale plans of scale 1: 5 000 (map5000m.rsc).
Publishing of updates in bank of spatial data is made by using the program of
Publishing contents of bank of spatial data on the geoportal and data access for downloading are implemented by means of
Free maps on the basis of OpenStreetMap data are available for download on the page "Digital maps and images".
From November 25 till 29, 2019, the Fifteenth All-Russian Scientific and Practical Conference and Exhibition
At conference the possibilities of the
File storage of the Databank can be distributed and hosted on several storage devices, including in the cloud. At the same time, the software package does not limit the amount of data stored - the size of the storage depends on the technical capabilities of the customer. The main advantage of the Databank is its visual representation of spatial data: all materials of engineering survey in the form of spatial objects are displayed on the map-scheme. Thus, the software package is suitable for the formation and maintenance of a fund of digital materials for engineering surveys, and due to its flexible structure and decentralized organization of storage, the Data bank of digital maps and RSD can be used for conducting funds at different levels: federal, regional, municipal.
The conference "Prospects for the development of engineering surveys in construction in the Russian Federation" is the largest event in the industry, with more than 500 specialists annually taking part in it. As part of the event, a plenary session and the thematic sections devoted to different types of engineering surveys were held.