Copyright © Panorama Group 1991 - 2020
On October 25, a round table was held at the Analytical Center for the Government of the Russian Federation on the topic
Federal Information Address System (FIAS) is the federal state information system that provides the formation, maintenance and use of the state address register. FIAS data are used in such software products of the KB as
As part of the round table, the experts discussed the existing difficulties in working with the Federal Information Address System in terms of filling out, updating, interacting with organizations and departments involved in the address assignment process. The event was attended by representatives of federal executive bodies, IT-companies, expert organizations. Following the discussion, the Analytical Center will prepare proposals for the development of FIAS, which will be sent to the Ministry of Digital Development, Telecommunications and Mass Media of Russia and the Federal Tax Service.
In KB "Panorama" the
Support of a new geoportal Flightradar24 is added for realisation of monitoring the movement of aircraft. To view the current position of the aircraft it is necessary to connect a geoportal "Monitoring the Air Traffic", to set the necessary period of updating, for example 5 seconds, and to enable the property "Update of WMS layers". In the process of monitoring, you can see the properties of the selected flight: airport of departure and arrival, travel time, model, speed, direction of movement, altitude and other parameters. Aircraft on the map are displayed with various conventional symbols depending on their model, dimensions, seating capacity. In total into the classifier service.rsc 16 new conventional symbols were added. Among them, such lines of aircraft as: SuperJet, TU, IL, Airbus, Boeing, Bombardier, Dassault aviation and others. The user can change the image of conventional symbols and expand the list in the "Classifier Editor".
New property "Save time and date of object update" is added in the dialog of creating a new map. If the map is created with the specified property, then into each object, when creating and editing, service semantics are automatically recorded with the date and time of the performed operation and with the name of the operator that performed the operation. The specified property can not be disabled. The task of creating objects according to the template has been improved. Appearance of dialog the "Geoportals list" is improved.
Display of rasters with cut-off of images by a frame is improved. There is improved the accuracy of the image cut-off for different scales of display. It allows to display more precisely a mosaic of rasters without discrepancies and imposing of images of the adjacent rasters at scaling. New implementation of forming the images of the reduced copies of a raster allows to improve detailed elaboration of the general image.
GIS "Operator" is an universal domestic geoinformation system for power structures. The program is intended for accumulation, the storage, the automated processing and displaying the data, results of calculations and the forecasts having a geospatial binding. GIS "Operator" contains tools for displaying and processing vector, raster and matrix maps. The application provides users with tools for solving specialized tasks of modeling the movement of special objects against the background of 3D model, a forecasting the consequences of emergencies on hazardous objects, a monitoring the movement of aircraft, a performing the geodetic and topographic work, processing data from GPS/GLONASS navigation devices, a printing the displayed spatial data to various output devices and many others. GIS "Operator" SE is certified by the 2nd level of control of the absence of undeclared capabilities in the RF Ministry of Defense.
The new version of the program is available for download in the
On the geoportal
The maps were led to the modernised classifier of large-scale plans of scale 1: 5 000 (
Free maps on the basis of OpenStreetMap data are available for download on the page "Digital maps and images".
In KB "Panorama" the
Into the main menu of the task, the functionality of working with the database of 3D tiles (DB3D) has been added. Now you can close the database selected in the list, select the displayed databases and individual models. The mode was added for deleting the selected model from the database of 3D tiles. Mode is implemented for disabling the display of the sky above the 3D model.
Support for the international format OGC 12-128r15 GeoPackage version 1.2.1 (* .gpkg) is implemented. This format is a SQLite 3 database that stores tiles of various formats, their coordinate system, matrixes of descriptions, and metadata. GeoPackage format is used in applications for providing access to spatial information: maps, images, matrixes of elevations. The format can be used in cloud storages and for simplifying the exchange of information, since all data is stored in one file.
Modes are improved for adding maps, matrixes or rasters into the work region. If the parameters of the coordinate system/projection of the added data and the open area do not match, a request is issued to convert the coordinate system/projection with the ability to select one or all files. Depending on the response of the operator, data with a mismatching coordinate system will be transformed to the coordinate system of the document and added to it or opened without change with the conversion of the coordinate system "on the fly".
The transformation of the coordinate system of raster and matrix data is accelerated by 10-15 times due to the use of multi-thread processing for multi-core processors and new algorithms for tile processing.
In the menu Options\Coordinate System\Geodetic (World WGS 1984 spheroid) the item "Degrees, Minutes" has been added to display the coordinate view, as in a number of applications for smartphones.
The task "Select Object" has been improved. On the bookmark "Metric" there is added the ability to select, copy and paste an array of coordinates through the clipboard. The copied coordinates can be used for pasting into Word, Excel, Notepad and other applications.
In the "Select Object" dialog, new modes have been developed: "Select object on a map" and "Object autosave". The mode "Select object on a map" allows you to mark the selected object on the map. The mode "Object autosave" is intended for automatic saving the attributes and metrics of object with possibility of step-by-step restoration.
The mode "Create object" of the task "Map Editor" has been improved. When creating an object using the "Arbitrary contour" mode for linear, polygonal and vector objects, the ability of dynamic entering the length of a segment is added.
The task of creating a matrix of heights by a vector map is improved. Into the application directory there is added a filter of objects s57navy.imh used by default for creating a matrix of heights by sea maps with the s57navy.rsc classifier. When creating a matrix using sea maps, isobaths are used (semantics the "ISOBATH VALUE", code 174), depths marks (H coordinate from metric), as well as objects of the "OBSTACLE" layer, for example, "UNDERWATER DRYING ROCK", "SUNKEN SHIP" (semantics the "DEPTH VALUE", a code 179). To include the specified objects in the processing in the matrix creation dialog, you need to set the matrix type "Summary elevations" and enable the mode "Use elevations from 3D-metric of objects".
The task “Converting geodetic heights of WGS-84 to normal heights” has been improved. It is intended for transition to heights on a geoid (normal heights) from geodetic heights on a general ellipsoid WGS-84. For example, downloaded from the SRTM format (radar topographic survey) and others. The inverse transformation of matrixes from normal heights (mean sea level) to the system of geodetic heights WGS-84 has been implemented.
There is added the ability to display insets under the vector maps, which simplifies the preparation of reports against the background of map fragments, images and other types of data that are connected as insets.
Display of vector symbols is improved. New symbols automatically arrange the signatures of settlements, which may contain the name, number of inhabitants and a code of administrative value. Previously, these signatures were performed by three separate signatures that at increasing the image of a map led to integrity violation of signatures complex of the one settlement. New complex signatures preserve the relative position of all the signatures of the complex when scaling the map image, and also allow you to specify the position of the complex with a single operation. New symbols have been added to the classifiers 50t05gm.rsc, 100t05gm.rsc, 200t05gm.rsc, 500t05gm.rsc, 1m05gm.rsc, which are used to create maps of scales from 1: 50,000 to 1: 1 000 000.
Classifiers of conventional symbols emercom.v2.rsc and map5000m.rsc are added into the distribution kit. The classifier of conventional symbols emercom.v2.rsc has been developed for the preparation of cartographic information in the field of civil defense, prevention and liquidation of consequences of emergencies by governing bodies, civil defense forces and the unified state system for the prevention and liquidation of emergency situations (RSChS). In the classifier there is implemented a general list of layers, objects and attributive characteristics of objects that provide solutions to problems in the field of civil defense, prevention and liquidation of consequences of natural and man-made emergencies. The emercom.v2.rsc classifier contains the information about territories, zones, objects, forces and means affecting the problems of organization, planning and conduct of measures for civil defense and the protection of the population and territories; about the forecast and operational situation arising in the course of military conflicts or as a result of these conflicts, as well as during emergencies of a natural and man-made nature; about planning and conducting activities on civil defense, prevention and liquidation of consequences of emergencies of a natural and man-made character.
The modernized classifier of large-scale plans of a scale 1: 5 000 the map5000m.rsc is designed to create topographic plans of cities or city plans in the local coordinate system of scales of 1: 5000, which can be used in territorial planning, maintaining the land and property cadastre, in architecture and urban planning. The codes of the Information Cartographic Support approved by the Head of the VTU General Staff of the Russian Federation in 2007 are taken as the basis of object codes.
As part of data examples included in the installation, the map of Noginsk generated according to OpenStreetMap data, has been updated. The map was led to a modernized classifier of large-scale plans of a scale 1: 5 000 map5000m.rsc. A library of 3D-models of terrain's objects map5000m.p3d has been added to the classifier, in which there were created about three hundred kinds of templates for objects of layers: "Constructions, buildings", "Industrial objects", "Municipal and social objects", "Public objects", "Communications", "Borders and fences", "Road net, road constructions", "Vegetation", "Hydrography". To the two-dimensional types of objects there are assigned the templates of types: near, detailed, and far, less detailed. In the complete set with a map there are delivered: a database example in DBF and PostgreSQL format, a road graph, a relief elevation matrix, a database of three-dimensional models of historic city buildings in DB3D format. Into the map project the documents in Word format, raster documents and a map of borders of the Moscow Region were added.
The new version of the program is available on the site in the
In Krasnodar, from October 16 to 17, the International Forum
The presented system of interacting software modules fully meets one of the main goals of the direction of developing the digital economy regarding the information infrastructure specified in the
As part of the conference, negotiations were held with representatives of agricultural producers and system integrators. As a result, agreements were reached aimed at promoting and improving the line of agricultural geographic information systems, including